Innovaphone IP240 Operations Instructions download pdf (Page 29)

Operating Manual IP Telephone IP240 - 27 -- 27 -

6.1.2 Setting up call diversion

Proceed as follows to activate call diversion,:

1. In the initial state, press the menu key,

function key net to User Setup and next to Call Diversion.

2. With the relevant function key, select the desired setting: “Unconditional”, “Busy”

and/or “No reply”.

3. Then press the arrow down key.

Enter the desired diversion destination (name or number).

4. Save the entry by pressing the Menu key twice.

6.2. Do not disturb

This function allows you to respond in a particular way to incoming calls.

The incoming calls are categorised as:

¾ Internal Calls, External Calls , Any Call

For defined incoming calls, you can choose between three possible responses (Action):

Ringing

off

Your telephone will not ring for incoming calls. The setting is indicated on

the display by the symbol.

The call is still shown on the display, however, and you can take the call

at any time.

Silence In the “Silence” state, the ringing of your IP telephone is suspended for

incoming calls. The setting is indicated on the display by the symbol.

Unlike with the "Ringing off" function, it is not possible to take the call. A

dial tone is nonetheless forwarded to the caller. You will see the missed

call on the display.

Busy With this option, the call is blocked. The caller receives a busy signal.

Out of

Office

See chapter 3.7.

Tip:

Operation is faster if you assign a call diversion to a function key.

Tip:

Pressing the function key once more cancels the previous diversion setting.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

No comments

Innovaphone IP240 Operations Instructions Page 29